Remove Ransomware Using Anvi Rescue Disk

Ransomware has become a growing menance to the whole world and many users across the global have to face this nasty treat. Ransomware infect the computer with potential vulnerabilites with the help of trojans. Once inflitrate, it will take over the entire OS and the victim computer is totally block from any action, even in Safe Mode running. Meanwhile, there will be a full screen of warning in name of local authorities to scare victim users and ask for a ransom to escape the certain lawsuit and unlock the computer. Such infection is nasty and hard to handle.


In order to help victime users whose computer is infected by ransomware and entirely locked from even in safe mode running, We Anvisoft has developed a convenient and efficient tool-Anvi Rescue Disk to handle this specific infection. Below is a detailed removal guide to help users get rid of ransomware using Anvi Rescue Disk.  You may follow the instructions all the way to do the virus removal and if any question in the process, feel free to get in touch.



Below is a video of ransomware removal using

Anvi Rescue Disk for reference.

step 1

Download the Anvi Rescue Disk iso image file Rescue.iso and the USB disk

production tool BootUsb.exe from Anvisoft official site.

Direct download link:

Please kindly note that Rescue.iso is a large file download; please be patient while it downloads.

step 2

Record Anvi Rescue Disk iso image to USB drive. You can also record the iso image to a CD/DVD. We will introduce the steps to record iso image to a CD/DVD in following guide.


Connect USB to computer. You’d better backup your important data and format your USB drive before use it to record the iso image.

Locate your download folder and double-clicking on BootUsb.exe to start it. And then click “Choose File” button to browser into your download folder and select Rescue.iso file as your source file.


Select the path of USB drive, such as Drive H:

Click “Start Burning” to start the burn of USB Rescue Disk boot drive.

Please close BootUsb.exe tool after you successfully burn the file to USB drive when you get following message.



Now, you have bootable Anvi Rescue Disk to repair your computer.

Alternative Option

You can also record Anvi Rescue Disk iso image to a DV/DVD. Any CD/DVD record software is fine for burn iso image. If you don’t have any, you can download and install Nero Burning ROM and ImgBurn. Here we will use Nero Burning ROM for demonstration purpose.

Please open and start Nero Burning ROM and select Burn Image from the drop-down menu of the Recorder.


Locate your download folder and select Rescue.iso file as your source file and then click Open button.



Click Burn button to start record the iso image. After a few minutes, you will have a bootable Anvi Rescue Disk to repair your computer.

step 3

Restart your computer and configure your computer to boot from USB drive/DV/DVD that recorded Anvi Rescue Disk. Basically , you can use F8 to load USB boot menu.

For different motherboard, you may need to use the Delete or F2, F11 keys, to load the BIOS menu. Normally, the information how to enter the BIOS menu is displayed on the screen at the start of the OS boot.


The keys F1, F8, F10, F12 might be used for some motherboards, as well as the following key combinations:

• Ctrl+Esc• Ctrl+Ins• Ctrl+Alt

• Ctrl+Alt+Esc

• Ctrl+Alt+Enter

• Ctrl+Alt+Del

• Ctrl+Alt+Ins

• Ctrl+Alt+S


If you can enter Boot Menu directly then simply select your CD/DVD-ROM as your 1st boot device.

If you can’t enter Boot Menu directly then simply use Delete key to enter BIOS menu. Select Boot from the main BIOS menu and then select Boot Device Priority. After that, set USB drive or CD/DVD-ROM as your 1st Boot Device. Save changes and exist BIOS menu.

step 4

After that let’s boot your computer from Anvi Rescue Disk.

Restart your computer. After restart, a message will appear on the screen: press any key to enter the menu. So, press Enter or any other key to load the Anvi Rescue Disk please selected your preferred language and press Enter to continue.

step 5

Now you are in the mini Operating system, please double click Rescue tool to start Anvi Rescue disk.

step 6

Make sure that your computer is connected to network connection before you run a scan on your computer. If you fail to connect your computer to Internet, please check the tutorial on network configuration in this article: Remove Ransomware using Anvi Rescue Disk-Network Troubleshooting Tips.

step 7

Please run a full scan by clicking the “Scan Computer” button in the middle of the program to detect and kill the PC lockup virus.

step 8

Clicking “Fix Now” to Remove the detected threat by Anvi Rescue Disk.

step 9

Switch to Repair tab. Scan and fix the registry error with the “Repair” module of Anvi Rescue Disk.


Important Notice: You must repair the registry error after kill the virus. You are probably disabled to boot your Windows without fixing registry damaged by the virus.

step 10

Now your computer should be clean and rescued from the virus infection. Please restart your computer into the normal Windows mode. To prevent the computer from infecting by such ransomware or related Trojans, please ensure you get proper protection on your computer and you may just keep theAnvi Smart Defender for this. Safe and direct download link:

Social Share Toolbar
Leave a comment


5 thoughts on “Remove Ransomware Using Anvi Rescue Disk

  1. Im having trouble with this – Ive scanned and removed threats (had to scan a number of times as the program kept freezing and had to restart the computer). Have gone to repair, scanned for faults and then asked it to repair them. BUT it keeps getting stuck at the network one (second to last). It just need to repair that and the one below, about system security, but it freezes the whole comupter! Plese help.

    • I apologize for the problem caused to you.

      Could you provide us information that we will test the problem out and fix it as soon as possible.

      Information includes:

      1. What’s your operating system and the service package?
      2. 32-bit and 64-bit?
      3. What language do you use?

      We are waiting to hear from you as soon as possible.

      Thanks a lot for your support.

  2. So I’ve been trying to clean a PC with this program for the past two days. and every time I run it, it just locks up the entire system halfway through the scan. It’s being used in conjunction with a CDLinux rescue disk that I downloaded a few days ago. No odd behaviour beforehand, just hard-locks the system.

    • Hello Hallucion,

      What ransomware virus did you get on your computer? Have you burned the rescue disk with the USB drive or the CD/DVD? Could you please explain more detail about your problem?

      Did it hard-locks the system when you run full scan with the Anvi Rescue disk?

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Are you human? Click the Pineapple...